Unfortunately, one of the most important elements of treatment can be the most boring one. Cleaning is one but indispensable for any professional treatment. This article serves to summarize how to keep wax pots, tools and control areas as appropriate as possible. The article is divided into sections, each of which addresses a particular item.
It is a good practice to manually treat the hand disinfecting gel / spray at the beginning of each treatment before the customer. This will help to show you your commitment to hygiene without crying out. Your actions are louder than your words.
Wax heaters
Clean and wipe the waxes or dripping from the heat during the day. When cleaning the heater, always make sure you are using a Wax Equipment Cleaner. If you use the Surgical Or Acetone, you will find that it will dry out the plastic and make it fragile, leading to cracks and damage to the heater.
There is a small, well-labeled bottle, clean it and then spray it onto a wax strip at the end of the treatment and wipe the radiator. This will do the job quickly and easily and work regularly. When using any detergent, always wear suitable gloves to protect the skin.
When wax is loaded into a rechargeable internal container, you may want to change the wax you are using. To do this, thoroughly clean the bucket to remove all the traces of the previous wax. It is also a good practice to change waxes once, just to ensure that the bucket and the product are clean and free from all contamination.
The usual way It's pretty simple; First heat the bucket – maybe a little warmer than the wax is usually very thin. Carefully guard your hands with care (do not wish to burn yourself), remove the bucket and pour a suitable container on any of the wax on the bottom for disposal – do not pour into the drain.
Now leave the bucket in a safe place to cool down completely. After it was cold, pour a few cleaners into the bucket, approx. 0.5 to 1 cm depth. Leave it for a few minutes and then boil it to dissolve as much wax as possible. You may be able to distribute stubborn bits using the spatula. Throw the appropriate container back and repeat the procedure repeatedly until all the wax is removed.
After all wax has been thoroughly removed, wash the bucket with warm water. Then fill with the disinfectant solution of the tool and ensure that the required time is minimized. Then rinse thoroughly and leave to dry completely before re-use. This must be cleaned between each customer.
Tweezers and other small tools The easiest way is to use a suitable disinfectant device such as Barbicide or my Personal Preferences Mundo Power Plus device and device disinfectant. You must take into account the manufacturer's instructions on how long the tools should work in the solution, ten or more minutes, and how often the solution has to be changed.
Mundo is a manufacturer with a fantastic small tray to embrace the tools to be completely clean and ready for use.
Handling Cup / Table and Surfaces
Oils and Products Soak Soak the Towel on the Desk. Always wipe this with a suitable disinfectant every time you change the towel. You can also get disposable wipes that can make this task even faster and easier. Be sure to check if the cleaning device is suitable for covering the tables. Some can dry out vinyl and other coatings that ultimately ease cracks and tears that can be costly to repair.
You also need to make sure you wipe the surfaces, such as a carriage or any worksheet. Use suitable disinfectant.
Towels
All these customers should be clean and fresh. Wash the towel at least 60 degrees Celsius. Personally, I use textile waste with towels, some say it should not be because it can affect their proper absorption but my towels are down or under.
Source by sbobet
sbobet thai
sbobet thailand